Your Cart

Bradbury H2603HG + AH187 - with extra height - 3 Phase - 6 Tonne

Bradbury H2603HG + AH187 - with extra height - 3 Phase - 6 Tonne
Bradbury H2603HG + AH187 - with extra height - 3 Phase - 6 Tonne

Bradbury H2603HG + AH187, 6T lift baseless with overhead gantry with extra height (+1000mm) 3 Phase:

Special Buy Price £5,960 Plus Vat

Delivery Price Included

Total Price £5,960.00 Plus VAT

Price subject to site survey to check for height, width, and depth!

Optional Extra:

100mm High lift pads for Bradbury H2403/H2603 (Comes with four) - Price £285.00 Plus VAT

The H26 series of Bradbury twin-ram two post lifts are fully baseless with overhead gantries making them ideal for moving transmission jacks and oil drainers beneath the vehicle. With a low pad height of just 122 mm these lifts are suitable for most makes and models of cars up to long wheelbase vans. Free set of 185mm high lift pad adaptors AH187. H2603HG – with extra height (+1000mm) Gantry height of 5256 mm (drive under clearance).

Installation is to a nominally level floor (plus or minus 4mm), prepared site on the UK mainland.

Lifting capacity


Lifting & lowering Time

60 Seconds

Lowering Time

40 Seconds

Minimum Height (pad)

122mm – 215mm

Maximum Height

1972mm – 1965mm

Front minimum / maximum arm length

981mm - 1811mm

Rear minimum / maximum arm length

981mm – 1811mm

Motor size

Three phases only – 2.2Kw

Power Requirements      

3 Phase – 16 A Isolator Required



NB: The above prices include delivery and installation on a prepared site, but not electrical works, final electrical connection, civil works or the removal, relocation, or disposal of existing equipment.

A forklift truck and driver when required by the engineers or an alternative will be required to remove the lift from the delivery vehicle and aid in the installation; this is the responsibility of the customer. An “Installation” request form will have to be completed by yourselves prior to installation.

We would be able to carry out a Load Test on the day of commissioning if you supply a suitable laden vehicle to the SWL of the equipment with corresponding weighbridge certificate. If this is not done at the time of commissioning and is required later this will be chargeable to yourselves.

On installation should it be found that the floor quality is inadequate & chemical anchor studs and resin are required, or if the floor is uneven and packing out of posts is required then an additional charge will be made.

The concrete floor will need to be of sufficient depth and quality for the lift to be installed, should it be found the floor is not of sufficient depth and quality and civil works are required (such as new concrete pads or plinths) the price for any civil works is not included.   

Exclusions: The above prices are exclusive of VAT and subject to manufacture’s price ruling at date of dispatch. Also, prices do not include building or electrical works unless specifically stated and are calculated on a clear run basis. Customers may be required to supply lifting equipment for heavy items. Carriage will be charged where applicable. E &.O.E

Ex Tax: £0.00
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.